Grit Table / compounds / CKTG (Ken Schwartz) CBN emulsion / spray
Product, maker figures
CKTG (Ken Schwartz) CBN emulsion / spray
Compound
The maker publishes these figures. A single value per grade, no distribution given, so each is drawn as a point.
Each grade below shows its size in microns, its spread (the published distribution, where a maker or standard gives one; most makers publish none), and where that size lands on the reference scale , a shared yardstick for reading grit numbers across makers.
Particle size microns, log
5 3 2 1 0.5 0.3
coarser finer
ink measured or standard maker figure our estimate
shape known distribution point, spread unknown
0.1 micron Maker-published
CKTG (Ken Schwartz) 0.1 µm
Maker-stated micron.
spread not published · reference scale about #31500
0.25 micron Maker-published
CKTG (Ken Schwartz) 0.25 µm
Maker-stated micron.
spread not published · reference scale about #19500
0.5 micron Maker-published
CKTG (Ken Schwartz) 0.5 µm
Maker-stated micron (dedicated spray product page).
spread not published · reference scale about #13050
1 micron Maker-published
Maker-stated micron (dedicated spray product page).
spread not published · reference scale about #8850
3 micron Maker-published
Maker-stated micron.
spread not published · reference scale about #4000
6 micron Maker-published
Maker-stated micron.
spread not published · reference scale about #2200
8 micron Maker-published
Maker-stated micron.
spread not published · reference scale about #1500
This is reference, not a recommendation. Particle size is defined by the abrasive grading standards (ISO 8486, ISO 6344, JIS R6001, ANSI B74, FEPA); the full references are listed and linked here .