English
Grit Table / diamond / Venev Resin-bonded diamond
Product, maker figures
Venev Resin-bonded diamond
Diamond
The maker publishes these figures. A single value per grade, no distribution given, so each is drawn as a point.
Each grade below shows its size in microns, its spread (the published distribution, where a maker or standard gives one; most makers publish none), and where that size lands on the reference scale , a shared yardstick for reading grit numbers across makers.
Particle size microns, log
100 50 30 20 10 5 3 2 1 0.5 0.3
coarser finer
ink measured or standard maker figure our estimate
shape known distribution point, spread unknown
200/160 (F80) Maker-published
Range 160 to 200 µm. FEPA-F ~F80.
spread 160 to 200 µm · reference scale about #90
160/125 Maker-published
Range 125 to 160 µm. FEPA-F cited as both ~F80 and ~F90-95; the micron band itself is unambiguous.
spread 125 to 160 µm · reference scale about #110
100/80 (F150) Maker-published
Range 80 to 100 µm. FEPA-F ~F150.
spread 80 to 100 µm · reference scale about #160
50/40 (F240) Maker-published
Range 40 to 50 µm. FEPA-F ~F240.
spread 40 to 50 µm · reference scale about #290
20/14 (F400) Maker-published
Range 14 to 20 µm. FEPA-F ~F400.
spread 14 to 20 µm · reference scale about #680
7/5 (F800) Maker-published
Range 5 to 7 µm. FEPA-F ~F800.
spread 5 to 7 µm · reference scale about #2200
3/2 (F1200) Maker-published
Range 2 to 3 µm. FEPA-F ~F1200.
spread 2 to 3 µm · reference scale about #4800
2/1 (F1500) Maker-published
Range 1 to 2 µm. FEPA-F ~F1500.
spread 1 to 2 µm · reference scale about #7050
1/0 (F2000) Maker-published
Range 0.25 to 1 µm. FEPA-F ~F2000.
spread 0.25 to 1 µm · reference scale about #13050
This is reference, not a recommendation. Particle size is defined by the abrasive grading standards (ISO 8486, ISO 6344, JIS R6001, ANSI B74, FEPA); fuller references in the project REFERENCES.